Precision Painting Plus

COLD WEATHER DOES NOT HAVE TO PUT ALL HOME PROJECTS ON HOLD. Brighten Your Space with a Winter Paint Job.

Interior Paint

If it is too cold to paint the exterior of your home, but this cold weather can not put your interior painting job on hold. You can do interior painting in winter also.

Some effective tips:

1. Latex paints (Water-based) can be applied this time of year without cracking a window for ventilation.
2. Always choose low-odor version of latex paint when painting in winter.
3. Low VOC paint that does not give off toxic fumes.
4. You need moderately-heated rooms that are not too warm.
5. The paint might take a little longer to dry if there is cold air.
6. If there is high humidity in the home, but air in homes tends to be drier in winter.
7. Always try to keep low humidity in the room. Because this plays an important role in paint drying process.
8. Ventilation is important to maintaining air quality.

Image Credit:

http://www3.valsparatlowes.ca/image/component/RoomComponent/roomImage/1/404279.jpeg

Home Paint Brushes

While painting a room, it’s require to know how to use a paint brush for getting desired result. It’s easy to learn

There is a process to proper paint brush usage. It involves these steps:

1. Brush Loading;
2. Paint Application and Paint Distribution;
3. Paint Smoothing.

Here are some quick tips…

Step 1: Loading the Paint Brush

There is a right way to load paint onto the brush. You can either use paint from the paint can or pour some paint into a painting pail.

You need to carry paint with you as you paint using a brush are with these two products:
* Paint Can Handle
* Paint Pail.

* You need to dip the brush directly into the paint up to 1/3 of the length of the bristles. This stops the brush from being overloaded with paint and prevents dripping.

* Tap both sides of the brush lightly against the side of the can or pail.

* Do not scrape the paint off the brush by dragging across the edge of the bucket. That removes the paint and makes the brush ineffective.

Step 2: Applying and Distributing Paint on the Wall

* Basically you will use a roller for large flat wall areas and a paint brush for “cutting in.” Cutting in is a term used to describe painting the corners at walls and ceilings and around baseboards and door/window trim.

* If you are right handed, cut in the wall at the ceiling corners from left to right. If left handed, paint right to left. This will give you visual control over how well the paint is flowing.

* Press the brush against the wall just enough to flex the bristles. Use the narrow edge of the paint brush when cutting in.

* If painting a larger wall area you will use a different technique in applying and distributing the paint.

* Holding the paint brush at about a 45 degree angle, paint the area using several diagonal strokes. Again, press the brush against the wall just enough to flex the bristles.

* Now distribute the paint on the large flat area with horizontal strokes.

Step 3: Smoothing Out the Paint

Once the paint is applied and distributed on the wall or ceiling surface, the next step is to smooth it out. At the end of each stroke, lift the paint brush from the surface.

Once job is done, wash the paint brush properly. After drying, take plastic wrap and tightly wrap the brush bristles. You should be careful not to misshapen the bristles when wrapping.

Image Credit:

http://hallcopainting.com/wp/wp-content/uploads/2009/02/paint-brushes.jpg

Room Paint Color

When it comes to painting a room, preparation is half the battle. You should know everything about interior painting preparation before starting a job. The wide variety of interior paints are available in the market. But it will be knowledgeable if you know about their respective uses. Interior paints are available for every possible surface. If you use a wrong paint, the surface can be damaged. First you need to know which surfaces are ideal for a given paint.

Modern paint technology has taken a lot of the risk out of choosing the proper paint. Latex paints have been improved to withstand dirt, moisture, and daily wear and tear. They are washable and durable.

Still a vital factor is there that is your color preference. Type of color you want and it should fit your personality also. While choosing colors always remember that each room of your home has a different theme. Consider room theme before choosing the paint or starting a paint job.

8 quick tips for interior painting are mentioned below.

1. If you are going to paint over a previously painted surface, you have to notice for peeling, rough or chipped areas.
2. Move all the furnitures from the room. Because this the best way to find flaws.
3. If not possible, move all furniture in the middle of the room and cover them.
4. Take down the draperies and the drapery hardware.
5. Remove all the light fixtures.
6. Remove the wall plates from electrical outlets and switches.
7. Wash all the room.
8. Now you are ready to paint your room.

So enjoy painting!!!

Image Credit:

http://www.ymrenovation.com/images/interior-painting-3.jpg

Painting Brush

Now we all know that paint brush plays an important role while painting a room or a whole house. The fact is you have to know the use of these different type of brushes. Choose the right one for your job. It will make your job easier and give superior results. Home painting brushes come in a variety of sizes, shapes and various filament materials.

Paint Brush

Each paint brush has its own use. Every project you do will require generally two brushes, one is for general use or large areas and an another is for the finer details.

The good sizes are 3 inch, used for general or large piece of trim. Use 1½ for the finer narrow finish.

It also can be flat, oval and angular. Size ranges can be from 1-6 inches wide.

Surfaces that have so many angles, an angular brush can be used. For narrow surfaces multi purpose brush can be used. For all surfaces lat and oval shaped brush can be used.

You have to fix your mind that which paint brush is best for your task. Choosing should be considering type of paint or finish you want. 2 1/2 inches for basic cut-in and 1 1/2 inches for small trim. Always try to use the large brush.

Some basic shapes and uses of home painting brushes are…

1. For small surfaces such as touch-up, trim, moldings and window sashes 1-2 inch brush is a good choice.

2. For general cutting in of walls as well as all exterior trim 2-3 inch brush works great.

3. For large areas such as back brushing behind an airless sprayer or applying stain to a deck floor 4-6 inch brushes are perfect.

Purdy Syntox Angular Brush

2" Angular Brush

Paint Roller With Cleaner Kit

The fastest way to cover a lot of area is possible by using paint roller. This type of paint tool is easy to use on large surfaces and almost always gives up acceptable results. Visible roller marks are their snag, which occur when the paint is not applied calmly. These roller marks can occur for two reasons: either the roller face was not fully loaded with paint, or the paint on the roller was not spread equally. What you have to do you have to load the paint roller correctly, moisten it a little with the suitable solvent (for latex paints use water or for oil based paints use mineral spirits). Then bathe it in the roller tray basin and draw it up on the tray ramp. Roll the cover on the ramp a couple of times and start painting. Before doing it make sure to spread the paint equally.

Some important tips while using paint roller.

1. First buy a strong roller frame. You will be pressing on it rationally hard. Get one with a threaded end in the grip so that you can add an extension pole. Then pick the right sleeve for the job. Generally smoother walls take a shorter nap and heavier textures such as plaster need a longer nap.

2. Now you are ready to start the job. Start with a brush in all corners and around trim.

3. Prepare your roller ready. Before sinking the sleeve into the paint, moisten it with water (for latex) or solvent (for alkyd). After sinking it into paint roll off sufficient paint.

4. Set down the paint in an “M” or “N” shape. After that go back over it in direct columns, you should be careful to even out the paint ridges.

5. You have to keep a brush in order to smooth paint out.

6. Enfold the roller sleeve in foil or plastic wrap or immerse it in water (if you’re painting with latex) if you are going to discontinue painting for more than a few minutes.

7. After finishing make sure to clean both the roller frame and the sleeve well if you want to use them again. Press as much as you can to paint out of the sleeve. Then wet, squeeze, and wet until the liquid (water or solvent) is pretty clear.

Img Credir:

www.paintbrushesandrollers.com

Be it home or your office, you need a professional painting contractor to give it that extra look to be unique. In addition to the painting company, there are other factors that need to be evaluated before hiring a professional painting company. The presentation below, highlights all those important factors.

Stunning Interior Finishes

Painting a room is an art. Home interior painting or painting a room both are most important for you. It can trigger your mood like cool to anger or anger to cool. Listening funny. Trust me friend it happens considering human psychology. Always try to give a cool look to your room. Again each room has its own specialty.

Always understand the theme of each room.

To keep all these things in mind here are some tips for interior room painting.

1. Transfer all furniture to another room. If any heavy furniture is there, place it in the middle of the room, away from walls.

2. Use painter’s tape for taping windows and doors.

3. To prevent from dust and paint cover furnitures and floor with plastic drop cloths.

4. Remove screws, photos from the walls. Fill the holes untill you get a smooth wall.

5. Switch off all electrical switches of the room.

6. Keep away your children and pet from the room.

7. Assemble all eqipments like plastic drop cloths, sand paper, painter’s tape, paint scraper, Spackling Compound, Putty Knife, TSP (Trisodium phosphate) and Paint color.

8. Remove all lights from the room.

9. Wash down all the walls. You have to remove grease, grime and grit. Use TSP for washing.

10. A room’s surfaces should be painted in a following manner mentioned below:

A. At first If you are going to paint prime then prime the ceiling first, then trim and walls.

B. paint the ceiling, finish it.

C. paint the walls.

D. paint the baseboard trim;

E. paint the door and door trim

F. At the end paint the windows.

If you follow these steps mentioned above you can finish paint job earlier and in a efficient way.

Painting a room

Home paint means to paint whole house or interior / exterior of a house. Paint is nothing but a liquid. It makes a protective layer on the surface after drying. Paint is the combination of pigments, binders and solvents. Each paint has its own ingredients which enhance its performance for a particular surface.

The fact is house paint is more complex than explanation. While choosing the proper home paint is as important as the surface preparation and the application techniques used. You have to understand the various kinds of paint for maximum performance and appeal is very important.

Basically there are two types of house paints.

1. Latex paint or water based paint.
2. Alkyd paint or oil based paint.

1. Latex paint

The word “latex” referred to the use of rubber transform to an another as the resin, or solid, in paint. If any surface is painted with latex paint previously then next time it works gentle on the surface. It can even be used on unprimed drywall. Latex paint is the most popular and common types of paint. Primary liquid of this paint is water. It dries quickly. Its almost odorless. The quality of latex paint depends on the type of binder used for it.

Home interior painted with latex paint

Stunning latex interior painting

2. Alkyd paint

Alkyd paint means oil based, used to refer to paints that have a linseed oil or Alkyd base. Base of Alkyd is a synthetic oil. These paints require a solvent such as mineral spirits for thinning and clean up. Alkyd based paints are almost exclusively considered as enamels due to their gloss durability or semigloss finish. It can’t be applied on unprimed drywall. It’s suitable for previously painted or papered surface or raw wood. Solvents must be used for thinning and cleanup. Some types of alkyd paint are also weather resistant can be used for home exterior painting, wooden bench etc. Alkyd paint can be applied on unknown paint directly, no need to strip off the earlier coat.

Many professional painters like to use alkyd paint for house paint. Because its durable and stain resistant.

Exterior painted with alkyd paint