Home exterior is the shield of your home. You have to take special care about your exterior. If you dont problems will come back to you. If your house suffers from a number of surface problems like peeling, cracking paint, mildew, mottling and surfactant leaching, then be carefull your house shield is going to be mess up. We at Precision painting Plus offer a wide range of exterior painting services at Nassau county,Queens county,Suffolk,Bronx,Brooklyn in New York. Our skilled professionals work with our each client and craft a customized solution. Also from time and budget standpoint.

Watch the video and get 17 awesome tips while painting exterior.

Visit our site Precision Painting Plus

For your queries feel free to call us at 888.472.4680

, , , , , ,
Wall painted with Texture

Wall painted with Texture

Home interior painting or painting a room both are most important for you. It can trigger your mood like cool to anger or anger to cool. Listening funny. Trust me friend it happens considering human psychology. Always try to give a cool look to your room. Again each room has its own specialty.

Instruction are given below.

1. Transfer all furniture to another room. If any heavy furniture is there, place it in the middle of the room, away from walls.

2. Use painter’s tape for taping windows and doors.

3. Protect floor from dust and paint by covering it.

4. Take care about your electrical switches.

5. Prepare paint.

6. Choose perfect brushes.

Now you are ready to paint your room.

, , ,
Painting Brush

Painting Brush

Now we all know that paint brush plays an important role while painting a room or a whole house. The fact is you have to know the use of these different type of brushes. Choose the right one for your job. It will make your job easier and give superior results. Home painting brushes come in a variety of sizes, shapes and various filament materials.

Paint Brush

Paint Brush

Each paint brush has its own use. Every project you do will require generally two brushes, one is for general use or large areas and an another is for the finer details.

The good sizes are 3 inch, used for general or large piece of trim. Use 1½ for the finer narrow finish.

It also can be flat, oval and angular. Size ranges can be from 1-6 inches wide.

Surfaces that have so many angles, an angular brush can be used. For narrow surfaces multi purpose brush can be used. For all surfaces lat and oval shaped brush can be used.

You have to fix your mind that which paint brush is best for your task. Choosing should be considering type of paint or finish you want. 2 1/2 inches for basic cut-in and 1 1/2 inches for small trim. Always try to use the large brush.

Some basic shapes and uses of home painting brushes are…

1. For small surfaces such as touch-up, trim, moldings and window sashes 1-2 inch brush is a good choice.

2. For general cutting in of walls as well as all exterior trim 2-3 inch brush works great.

3. For large areas such as back brushing behind an airless sprayer or applying stain to a deck floor 4-6 inch brushes are perfect.

Purdy Syntox Angular Brush

Purdy Syntox Angular Brush

2" Angular Brush

2" Angular Brush

, , ,
Paint Brushes

Paint Brushes

We all paint our home interior or exterior. There are so many colors, designs and textures. No one can paint without any painting tool. It’s important to choose right tool for the particular job. There are so many painting tools in the market. Each and every tool has its own features, application techniques and all. Painting brush is one of them. It plays an important role for home painting. Today let us know about home painting brushes.

Home painting brushes

It’s needless to say that the quality of any paint job depends on the applicators. Rollers, high quality brushes and paint pad can do a better job. Better brushes hold their bristles and more paint color. With better brushes you can complete your paint job quickly with quality results.

There are two types of bristles.

1. Natural bristles work only with alkyd paints.
2. Synthetic bristles work with both alkyd and latex.

Paint Brush With Natural Bristles

Paint Brush With Natural Bristles

Paint Brush With Synthetic Bristles

Paint Brush With Synthetic Bristles

To Know More Visit our site Precisionpaintingplus.

Image Credit:

www.strongriver.net
www.solventfreepaint.com
www.motherearthnews.com

, , ,
Paint Pad With Tray

Paint Pad With Tray

We know that there are some house painting tools, paint pad is an another important out of them. Paint pad is helpful in applying paint in hard to reach places. Most pads are made of synthetic materials or plastic foam. Painting pads are suitable for both latex and alkyd paints. The end result of house painting depends on efficient preparations. It’s important to know right techniques. By using the right techniques, right strokes you can get the cool finish.

Some impotant tips while using paint pad.

Paint Pad

Paint Pad

1. First purchase the paint pad. Plastic of the kits can be used as the paint tray and as an airtight lid.

2. Hold an empty tray on your hand with the right side up. Then hold your tool properly. You can stick tape down one side of the tray.

3. Bring it lightly behind your palm and up to the other side of the tray. It will ensure the existence of the tray in place while you are working.

4. Hold the painting pad firmly and paint exactly at eye level in front of you. You will see what you are doing. You will have good control on the pad.

5. While using painting pads with tracking wheel, tape off the trim of wall or ceiling. Because when you apply paint on to the pad, paint can get on to the wheels and leave marks on the trim.

6. Then reload the paint pad and repeat the process after reasonable time, this will prevent the pad from drying.

7. Spread and apply the paint on long strokes, this will give you control.

8. If you are planning to take a break from painting, store the pad inside the tray and shut the lid to prevent the paint from drying.

9. Then load paint on the paint pad. This will ensure that there is no overloading of paint or sinking of the pad into the paint.

10. Wriggle the pad to get the paint on to the goam and bristles. Because this movement will not only load the paint but lock it in.

11. You have to move the pad gently across the edge of the tray to remove extra paint.

12. You have to apply the full pad firmly on the surface and move in one direction to deliver paint to the surface. Your next stroke should be on the same area in the opposite direction to fix the paint and remove bristle marks. Paint briskly, working from one side to the other side.

If you follow these minimum process you can get a good result.

Lets’ see some pictures.

Wall painting With paint Pad

Wall painting With paint Pad

Paint Pad With Handle

Paint Pad With Handle

Paint Pad

Paint Pad

Paint Pad

Paint Pad

Image Credit:

www.toolstation.com
www.acehardware.com
www.diytools.co.uk
www.mikewye.co.uk/Paint_Pad.htm

, , , ,
Paint Roller With Cleaner Kit

Paint Roller With Cleaner Kit

The fastest way to cover a lot of area is possible by using paint roller. This type of paint tool is easy to use on large surfaces and almost always gives up acceptable results. Visible roller marks are their snag, which occur when the paint is not applied calmly. These roller marks can occur for two reasons: either the roller face was not fully loaded with paint, or the paint on the roller was not spread equally. What you have to do you have to load the paint roller correctly, moisten it a little with the suitable solvent (for latex paints use water or for oil based paints use mineral spirits). Then bathe it in the roller tray basin and draw it up on the tray ramp. Roll the cover on the ramp a couple of times and start painting. Before doing it make sure to spread the paint equally.

Some important tips while using paint roller.

1. First buy a strong roller frame. You will be pressing on it rationally hard. Get one with a threaded end in the grip so that you can add an extension pole. Then pick the right sleeve for the job. Generally smoother walls take a shorter nap and heavier textures such as plaster need a longer nap.

2. Now you are ready to start the job. Start with a brush in all corners and around trim.

3. Prepare your roller ready. Before sinking the sleeve into the paint, moisten it with water (for latex) or solvent (for alkyd). After sinking it into paint roll off sufficient paint.

4. Set down the paint in an “M” or “N” shape. After that go back over it in direct columns, you should be careful to even out the paint ridges.

5. You have to keep a brush in order to smooth paint out.

6. Enfold the roller sleeve in foil or plastic wrap or immerse it in water (if you’re painting with latex) if you are going to discontinue painting for more than a few minutes.

7. After finishing make sure to clean both the roller frame and the sleeve well if you want to use them again. Press as much as you can to paint out of the sleeve. Then wet, squeeze, and wet until the liquid (water or solvent) is pretty clear.

Img Credir:

www.paintbrushesandrollers.com

, , , , ,
Painting Ceiling With Paith Roller

Painting Ceiling With Paith Roller

As we all know that room painting is important to improve the look and value of the room. But do you know if you are going to paint a room then from where you should start, from walls or from ceiling ? Today I would like to share my experiences.

While painting a room first paint the ceiling. Ceiling and walls are the easiest surfaces to paint. By using a proper roller you can apply paint quickly. You should use an extension handle for the roller  you are using to reach the ceiling. If you are using ladder make sure that your paint tray is attached to it’s utility shelf. You can wear goggle when working overhead with roller. It will protect your eyes from paint drop. Go slowly with the process. The faster you move the roller, the more paint will spray off the cover. Always try to do this job during day because natural light is the best for this job. Always try to do job in the small sections. It reduces the possibility of visible roller marks on the surface before it’s completely painted.

After that start wall painting. First paint the outlines of walls and ceiling of course with a brush. Use diferent brush angles to paint narrow edges or corners. Start with a diagonal stroke followed by back-and-forth strokes. Use roller to smoothen the brushed paint. Then apply vertical and horizontal strokes. So it’s easy. You can finish your job perfectly with these steps.

wallpaint

Painting Walls With a 9" Paint Brush

, , , ,
Paint Roller

Paint Roller

If you are planning to use a paint roller for painting your wall then you will need..

1. Paint Roller Pans
2. Paint Rollers With Extension Pole

Paint Roller

Paint Roller

Paint roller plays an important role while painting job is going on. Paint work with a roller is less exacting than working with a brush. The paint process with a roller is comfortable for a novice painter, he can feel it in just a few minutes.

First moisten the roller with water for latex paint or the appropriate thinner for different types of paint. You have to roll out the extra moisture on a piece of kraft paper or scrap lumber. You should not use newspaper because the roller may pick up the ink. After that you have to fill the well of the roller pan about half full, and set the roller into the middle of the well. Then pick up the roller to roll it down the slope of the pan. Just stop short of the well. You have to do this process two or three times to allow the paint to work into the roller. Once it done you should dip the roller into the well once more. Then roll it on the slope until the pile is well saturated. When you have overloaded the roller, be known. It drips route to the wall and have a tendency to slide instead of roll across the surface.

You should know the most effective method of painting with a roller, is to paint 2-or 3-square-foot areas at a time. First roll the paint in a zigzag way without lifting the roller from the wall. After that fill in the blanks with more vertical and horizontal strokes. Then finish the area with light strokes that start in the unpainted area and roll into the paint. At the ending stroke, raise the roller from the wall slowly so that it does not leave a mark. Go to the next unpainted area and repeat same processe and technique. You have to start from the below ending edge. At last smooth the new application. Blend it into the previously finished area.

Professional painters suggest that while painting a wall first stroke should be up. If you roll down on the first stroke, the paint might puddle under the roller and run down the wall. In addition to that, be careful about the rapidly use the roller across the wall that centrifugal force causes it to spray.

Paint Roller With Tray

Paint Roller With Tray

For More Information Contact Us Today at 888-472-4680

Get Your Free  Estimate Today.

, , ,
Faux Marble Finish

Faux Marble Finish

Faux finish or faux painting techniques are a super way to create pragmatic visual interest in any room. Faux painting includes many different techniques that combine glaze or paint. There are various tools to create faux finishes that imitate marble, stone, wood, and other textures.

Let’s see some awesome Faux Finishes.

.

Get your free Estimate today.

, , ,
Residential Exterior Paint

Residential Exterior Paint

Home exterior is the shield of your home. It’s needless to say that painting exterior of your home is very important. Basically it’s a shield of your home. You can give an extra armour to your home exterior shield by choosing the right paint color and right techniques. See some stunning home exterior painting.

.
, , , ,